Mellowmuse VST Pack 10 04 2010 ASSiGN

http://i42.tinypic.com/mucylf.jpg

Mellowmuse VST Pack 10 04 2010 ASSiGN | 57.6 MB
This pack include: CP1A VST v1.5, CP2V VST v1.0, EQ1A VST v1.5, IR1A VST v2.1, Mellowhead VST v2.1.

CP1A VST v1.5:
CP1A is an all purpose stereo/mono compressor, suitable for a range of compression tasks, from subtle dynamics taming to creative drum shaping. Employing a multi-stage feed forward design minimizes distortion artifacts, even at extreme compression settings. Controls have been kept to a minimum for ease of use.

Features:

* Separate wet and dry level controls allow the compressed signal to be mixed with the original, making New York style parallel compression super easy.
* The High Pass control for the sidechain, allows fine control of low frequency compression, great for keeping your kick drum from loosing its thump.

CP2V VST v1.0:
The vintage styled CP2V, is a track and program compressor, that captures the smoothness and harmonic richness of analogue circuits, in an easy to use package. Turning the Compression control gradually increases the compression ratio while lowering the threshold. The Drive level is then used to adjust for the drop in output and to add saturation to the compressed signal.

Features:

* With ease of use being a primary goal, the preset attack and release times mean there's no searching for the sweet spot.
* All compression and saturation algorithms are 4x oversampled using 64bit internal processing for increased clarity and resolution.

EQ1A VST v1.5:
EQIA is a super smooth analog style program EQ with minimal phase coloration The GUI is takes it's inspiration from classic outboard eqs, with all controls in easy reach. The CPU efficient design allows high instance counts, making it an ideal EQ for all tasks.

Features:

* EQ1A features a Hipass filter with variable Q, frequency sweepable Low/High Shelf filters, and Low/High mid peaking filters with variable Q. A bypass swich is available for each filter section, to reduce cpu usage.
* All internal processing is at 64 bits for maximum resolution and clarity.

IR1A VST v2.1:
IR1A is a general purpose convolution reverb, with an advanced convolution engine featuring zero latency. Great for anything from natural room ambiences and reverb to guitar cabinets and special Fx. IR1A loads standard mono or stereo impulse response files, in Aiff or Wav format, up to a max of 10 seconds in length.

Features:

* The start and end times of the IR can be set and HP, LP and predelay applied, allowing creative shaping of the original IR file.
* IR1A comes with a small selection of IRs, including reverbs, room ambience and guitar cabinets. The integrated file browser with sub folder support makes it easy to navigate and load files from large 3rd party libraries or take advantage of the many free IRs available online.

Mellowhead VST v2.1:
Mellowhead is a versatile guitar tube amplifier and fx simulator, with an emphasis on the raw organic sound of a miced tube amp. Multiple tube stages replicate the feel and early break-up of classic guitar tube amplifiers with their rich harmonic content. The signal path is intentionally mono, to reflect a real world setup where typically you have an amp, a speaker cab and a mic.

Features:

* There are 11 pre-amp settings, ranging from clean to brutal distortion, zero latency speaker cab convolution, a 4 band tone stack, 5 effects pedals, reverb, built in tuner and noise gate. Everything you need to create killer guitar tracks.
* External Aiff or Wav speaker IRs are loaded using the built in file browser. The cabinet bypass allows the use of 3rd party cabinet fx.

Mellowmuse.CP1A.VST.v1.5-ASSiGN
Mellowmuse.CP2V.VST.v1.0-ASSiGN
Mellowmuse.EQ1A.VST.v1.5-ASSiGN
Mellowmuse.IR1A.VST.v2.1-ASSiGN
Mellowmuse.Mellowhead.VST.v2.1-ASSiGN

Download

Code:
http://hotfile.com/dl/37144195/fe553...92010.rar.html